HQ-95Q three-axis gimbal camera with 1.5 km LRF
Four optical channels and a quick-release mount on the lightest three-axis head we build. The complete payload weighs 400 g and measures 95 × 97 × 124.7 mm, so it fits small multirotors and man-portable UAVs.
- Weight 400 g
- Three-axis stabilised
- EO Dual 8000 × 6000
- Thermal 640 × 512
- LRF 5 m – 1.5 km (± 1 m)
- AI detection & tracking
- CE / RoHS documentation available on request
- Export compliance statement available on request
- Calibration and test report supplied with every unit
What the HQ-95Q is
The HQ-95Q belongs to the HQ series, our gimbal camera series built on one stabilisation architecture. Every head in the family shares the same servo control, video pipeline and AI tracking module, which is why an airframe can start on one configuration and move to another without redesigning the mount or rewriting the integration.
Core capabilities
The features that decide whether imagery is usable in the air, in the order an integrator usually checks them.
- Gyro-stabilised line of sight
Direct-drive brushless axes with high-resolution encoding hold the line of sight to ≤ 100 μrad (1σ), and the stabilisation loop reacts at ≥ 60°/s angular velocity so imagery stays steady in turbulence and rotor wash.
- Continuous optical zoom
The visible channel is Dual 8000 × 6000, 9.5 mm + continuous zoom 15.3 – 49.7 mm. Continuous zoom keeps a wide search field and a tight identification field available without changing lenses, with autofocus and electronic image stabilisation at sub-pixel level.
- Uncooled thermal channel
640 × 512, 19 mm fixed, long-wave infrared with NETD ≤ 40 mK, boresighted to the visible channel so both sensors point at the same target with no re-alignment in flight.
- Laser rangefinding
The rangefinder measures 5 m – 1.5 km (± 1 m) at an eye-safe 1535 nm, which turns video into a distance measurement and feeds the target coordinate calculation.
- Onboard AI detection
Person, vehicle, vessel and aircraft detection runs on the payload itself, with no dependency on the data link and no frames sent to a ground station for processing.
- Multi-target tracking
Lock and follow up to 20 targets at once, with anti-occlusion logic that re-acquires a target after it passes behind terrain, a mast or another object.
Stabilisation and mechanical design
Three axes, direct drive
Yaw, pitch and roll are each driven directly by brushless motors with high-resolution encoding, so there is no gear backlash or step noise in the video. The loop is specified at ≥ 60°/s angular velocity and holds the line of sight to ≤ 100 μrad (1σ).
400 g in 95 × 97 × 124.7 mm
The complete head weighs 400 g and measures 95 × 97 × 124.7 mm, with 11–28 VDC input and power consumption of 15 W / 30 W. That envelope lets small multirotors and man-portable UAVs carry the payload without a bespoke mount.
On the aircraft
Mounting, cable routing and vibration isolation are agreed with the platform integrator, so the payload drops into an existing airframe interface instead of needing a bespoke mount.
Multi-sensor payload
Configured as EO plus IR plus LRF. Each channel is boresighted to the others, so one target sits in the same place on every screen.
EO / visible
Dual 8000 × 6000, 9.5 mm + continuous zoom 15.3 – 49.7 mm
Detection 0.4 km person / 2.4 km vehicle.
Thermal / IR
640 × 512, 19 mm fixed
Detection 0.53 km person / 2.5 km vehicle.
Laser rangefinder
5 m – 1.5 km (± 1 m)
Eye-safe 1535 nm, feeding target coordinates.
Channel detail
A sensor specification on its own rarely answers the operational question, so each channel is described here with the distance it actually supports.
EO / visible
The visible channel is specified at Dual 8000 × 6000, 9.5 mm + continuous zoom 15.3 – 49.7 mm. Detection distances for the visible channel are quoted at 0.4 km person / 2.4 km vehicle using the standard 1.7 m person and 2.3 m vehicle targets; recognition and identification distances are shorter and appear in the datasheet.
Thermal / IR
The thermal channel is 640 × 512, 19 mm fixed, uncooled long-wave infrared with NETD ≤ 40 mK. Thermal detection is quoted at 0.53 km person / 2.5 km vehicle. Performance does not depend on daylight, which is what makes the channel useful for night operations and for scenes obscured by smoke or dust.
Laser rangefinder
The laser rangefinder measures 5 m – 1.5 km (± 1 m) at an eye-safe 1535 nm. Range readings feed the target coordinate calculation, so the ground station receives a georeferenced position instead of a range bar in the video.
Detection and tracking at the edge
Onboard AI module
Detection, classification and tracking run on the payload, so the video feed stays usable when the data link degrades. The tracker locks onto a target selected on the ground station screen and holds it through occlusion, rotation and scale change.
What that means in the air
The operator sees a boxed target and a lock that survives occlusion rather than a raw feed. Because the module is common across the family, tracking behaviour does not change when the payload changes.
Tracking demonstration
Targets are boxed automatically as they appear, and the lock is held on the selected target even when it passes behind an obstruction.
Integration
One control protocol across the family
Every head in the range speaks the same control set, so moving from a two-axis to a three-axis payload, or adding a laser rangefinder, does not change the aircraft-side integration. The protocol document and video pipeline notes are supplied with the first unit.
Video, control and power
Video is carried as Ethernet in H.264 or H.265. The gimbal is controlled over RS-422, RS-232 or TTL with SBUS and MAVLink supported on the aircraft side, and power input is 11–28 VDC. Recording is handled on board, so the file exists even if the link drops.
Interface protocol document, video pipeline description and outline drawing are supplied with the first unit — ask the engineering team if you need them earlier for evaluation.
Full specifications
| Model | HQ-95Q |
| Series | Gimbal Camera Series (HQ series) |
| Stabilisation | Three-axis gyro-stabilised, ≤ 100 μrad |
| Sensor configuration | EO + IR + LRF |
| Visible channel | Dual 8000 × 6000, 9.5 mm + continuous zoom 15.3 – 49.7 mm |
| Thermal channel | 640 × 512, 19 mm fixed |
| Laser rangefinder | 5 m – 1.5 km (± 1 m) |
| Weight | ≤400 g |
| Dimensions | ≤95 × 97 × 124.7 mm |
| Power consumption | 15 W / 30 W |
| Detection (EO) | 0.4 km person / 2.4 km vehicle |
| Detection (IR) | 0.53 km person / 2.5 km vehicle |
Detection distances follow the standard 1.7 m person / 2.3 m vehicle convention. Rows marked as shared are common across the HQ series.
Shared across the HQ series
- Video output: Ethernet, H.264 / H.265
- Gimbal control: RS-422 / RS-232 / TTL, SBUS, MAVLink
- Input voltage: 11–28 VDC
- Operating temperature: −20 °C to +60 °C
- Sealing: Sealed housing for dust, wind and rotor wash
- Recording: On-board recording, imagery retained if the link drops
- AI module: Onboard detection, classification and multi-target tracking
- Mounting: Quick-release interface, adapters available for OEM airframes
Three-view outline drawing with connector pinout, available on request.
Mounting, interfaces and environment
Airframe integration is the part of a payload programme that is easiest to get wrong, so these are the numbers engineers ask for first. Everything below applies to the HQ-95Q.
Mechanical interface
The head mounts on a quick-release interface with a vibration-isolated gimbal base, and adapter plates are available for OEM airframes that do not share our bolt pattern. Mass and envelope are the catalogue limits for this head, so the aircraft-side budget can be checked before a prototype is built.
Electrical and data interface
Power, control and video are separated so the head can be flown from most autopilots: 11–28 VDC input, serial control on RS-422 / RS-232 / TTL, and video over Ethernet. On-board recording keeps the imagery even if the downlink drops.
| Payload mass | ≤400 g |
| Envelope | ≤95 × 97 × 124.7 mm |
| Power consumption | 15 W / 30 W |
| Input voltage | 11–28 VDC |
| Data interfaces | Serial (RS-422 / RS-232 / TTL), Ethernet, SBUS |
| Video output | Ethernet, 100 Mbps, H.264 / H.265 |
| On-board storage | Up to 128 GB |
| Operating temperature | −20 °C to +60 °C |
| Storage temperature | −40 °C to +70 °C |
| Mounting | Quick-release interface, adapter plates for OEM airframes |
| Sealing | Sealed housing for dust, wind and rotor wash |
Input voltage, data interfaces, video output, temperature limits and on-board storage are common across the range. The released three-view drawing with the connector pinout is supplied with the datasheet — ask the engineering team if you need it for an airframe review before quotation.
Where the HQ-95Q is used
Three mission profiles that match this weight class and sensor set.
- Power line and asset inspection
Visible and thermal channels on one stabilised axis let a crew read a conductor and its joint in a single pass, with the zoom range covering both the span and the fitting.
- Security and perimeter patrol
A light head preserves endurance on a small multirotor while making people and vehicles visible at night or through light foliage.
- Tactical ISR
Detection at the edge of the patrol area, with tracking that holds a target while the operator reports it.
Other heads in the range
Every model shares the same control protocol, video pipeline and AI module, so moving between them does not change the aircraft-side integration.
HQ series · 2-axis · EO + IR + LRF
HQ-85Q Stabilised Camera Payload ODM
Adds 3 km laser ranging to a two-axis platform for crews that need coordinates, not just imagery.
- Weight
- ≤500 g
- EO
- Dual 1920 × 1080
- IR
- 640 × 512
HQ series · 2-axis · EO + IR
HQ-64DA UAV Camera Gimbal OEM
The lightest dual-sensor head in the range — 2K daylight plus thermal on 260 g.
- Weight
- ≤260 g
- EO
- 2688 × 1520
- IR
- 640 × 512
HQ series · 2-axis · EO
HQ-64DB Drone Camera Payload OEM
Two fixed visible cameras — a wide and a narrow channel — at the lowest weight in the series.
- Weight
- ≤240 g
- EO
- Dual 2688 × 1520
- IR
- —
Questions engineers ask about the HQ-95Q
Is a larger or a smaller head a better fit?
If the identification range in the requirement is longer than this configuration covers, the next step in the family is a heavier turret with a longer focal length and a larger aperture. If the aircraft is weight-limited, a lighter head normally keeps endurance.
How far can the HQ-95Q detect a person or a vehicle?
Detection is quoted at EO 0.4 km person / 2.4 km vehicle, IR 0.53 km person / 2.5 km vehicle against the standard 1.7 m person and 2.3 m vehicle targets.
Does the HQ-95Q include AI detection and tracking?
Yes. Person, vehicle, vessel and aircraft detection plus multi-target tracking run on the payload itself, so they keep working when the data link degrades, and on-board recording keeps the imagery as well.
What is the lead time for a HQ-95Q?
An evaluation unit is usually supplied first so the integration can be tested on the bench and in flight, with production batches scheduled afterwards. Heads held in stock ship from a single unit, so the lead time is transit rather than a production slot; custom configurations are scheduled once the optical work is fixed, and the quotation confirms which models are held in stock.
What are the order terms for the HQ-95Q?
One unit for a stock configuration, custom builds from 100 units. A head held in stock ships from inventory, so the lead time is transit rather than a production slot; payment is by T/T with the schedule on the quotation, and the warranty is one year from delivery with support from our own engineers online.
Designed and manufactured by HITS
Optics, servo hardware, stabilisation firmware and the AI tracking module are developed in house, and every unit is assembled, calibrated and environmentally tested on our own line before it ships.
Request a quotation for the HQ-95Q
Send the platform, the operating altitude and the identification range you need and we will confirm the configuration. Contact us with your requirements.